悬臂式油泥高速铣削测量系统招标公告

广西机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2018年7月16日在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。

1．招标条件

项目概况：本招标项目为悬臂式油泥高速铣削测量系统采购项目，招标人为上汽通用五菱汽车股份有限公司，建设资金为招标人自筹。项目资金已经落实，已具备招标条件，现对该项目下列货物和有关服务进行国际公开招标。

资金到位或资金来源落实情况：项目资金已经落实

项目已具备招标条件的说明：已具备招标条件

2．招标内容

招标项目编号：0633-184012118B04

招标项目名称：悬臂式油泥高速铣削测量系统采购项目

项目实施地点：中国柳州市

招标产品列表（主要设备）：悬臂式油泥高速铣削测量系统 2套，详见招标文件。

3．投标人资格要求

投标人应具备的资格或业绩：投标人必须是制造商或制造商唯一授权的代理商，在招标机构登记并购买了招标文件，并已在中国国际招标网（www.chinabidding.com）成功注册。产品制造商必须通过ISO9001和ISO14001质量体系认证；制造商及其代理应有给至少3家国际或国内整车厂研发部门提供同类产品、同型号的成熟产品经验，且无重大售后服务问题投诉；投标方在中国境内有售后服务机构及维修能力（投标方须提供维修人员资质和维修地点）；请投标方在投标书中提供在用同类型设备的客户资料，提供的资料应具备如下信息：

是否接受联合体投标：不接受

未领购招标文件是否可以参加投标：不可以

4．招标文件的获取

招标文件领购开始时间：2018年7月16日

招标文件领购结束时间：2018年7月23日

获取招标文件方式：现场领购

招标文件领购地点：本项目只发售电子版招标文件，请潜在投标人于本招标公告有效期限内，即2018年7月16日8时30分00秒起至2018年7月23日18时00分00秒止，登录精彩纵横电子交易平台（www.jczh100.com）在线支付后下载招标文件。

招标文件售价：￥600 / $100

5．投标文件的递交

投标截止时间（开标时间）：2018年8月7日10:00（北京时间）

投标文件送达地点：广西机电设备招标有限公司柳州分公司（广西柳州市东环大道230号居上V8城A座17楼）

开标地点：广西机电设备招标有限公司柳州分公司（广西柳州市东环大道230号居上V8城A座17楼）

6．投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。

7．联系方式

招标人：上汽通用五菱汽车股份有限公司

地址：广西柳州市河西路18号

联系人：周显军

联系方式 ：（0772）2658613

招标代理机构：广西机电设备招标有限公司

地址：广西南宁市金湖路63号金源CBD现代城7层（530021）

联系人：廖俐娜、苏畅

联系方式 ：0771-2833821  传真：0771-2830802

电子邮件：dept1@gxbidding.cn

8．汇款方式

9．其他补充说明

中国国际招标网（www.chinabidding.com）为国家商务部指定的全国机电产品国际招标投标活动公共服务平台和行政监督平台，注册事宜请联系中国国际招标网，相关要求详见《机电产品国际招标投标实施办法》。

5

Bidding Notice

Guangxi Machinery and Electric Equipment Tendering Co., Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2018-7-16

1. Bidding Conditions

Overview: SAIC-GM-Wuling Automobile Corporation Ltd. invites sealed bids from eligible suppliers of Arm-Type High Speed Clay Milling and Measuring System by the way of international competitive bidding, and the project’s fund has been confirmed.

Source of Funds: The project’s fund has been confirmed.

Description of The Prepared Bidding Conditions: The project’s fund has been confirmed.

2. Bidding Content

Bidding No: 0633-184012118B04

Project Name: Arm-Type High Speed Clay Milling and Measuring System procurement project

Place of Implementation: Liuzhou, P.R.China

List of Products: Arm-Type High Speed Clay Milling and Measuring System  2 set.

3. Qualification Requirements for Bidder

Qualifications or Performance：

Bidder must be the manufacturer or manufacturer directly authorized agents to participate in the bidding, has been successfully registered in the China International Tendering Network (www.chinabidding.com), and in the tender registration and purchase of tender documents. Equipment manufacturers must provide quality system certificates such as ISO9001 and ISO14001；Manufacturers and their agents shall have mature product experience to provide R&D departments of at least three international or domestic OEMs  with similar product and same model, and there shall be no major after-sales service complaints;The bidders have after-sales service agencies and maintenance capabilities in China.( Bidders must provide the qualifications of maintenance personnel and maintenance locations).The bidder is requested to provide customer information with the same type of equipment in the bid The information should contain the followings:

Joint Bids: NOT Available             

Bid without the bidding documents: NOT Available

4. Acquisition of Bidding Documents

Beginning of Selling Bidding Documents: 2018-7-16

Ending of Selling Bidding Documents: 2018-7-23

To Obtain: On-site Purchase

Place: project only offer electronic tender documents, please invite potential bidders in this bidding announcement valid period, that is, 2018-7-16 08:30:00 until 2018-7-23 18:00:00 stop, login (www.jczh100.com) downloading bidding documents after online payment.

Price of Bidding Documents: ￥600/$100

5. Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time): 2018-8-7 10:00

Place of Bid: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd. (Address: 17F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

Place of Bid Opening: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd. (Address: 17F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

6. The evaluation results will be released on www.chinabidding.com.

7. Contact Details

Purchasers: Saic GM Wuling Automobile Co., Ltd

Add.: No.18, Hexi Road, Liuzhou, Guangxi, P.R.China

Contact: Mr. Zhou Xianjun

Tel.: （0772）2658613

Bidding Agency: Guangxi Machinery and Electric Equipment Tendering Co., Ltd

Add.: 7/F, Jinyuan CBD Building, No.63, Jinhu Road, Nanning, Guangxi, P.R.China

Contact: Ms. Liao Lina、Mr.Su Chang

Tel.: (0086) 0771-2833821   Fax: (0086)0771-2830802

Email:dept1@gxbidding.cn

8. Remittance Approach

9. Additional Instructions

China international tendering (www.chinabidding.com) for International Tendering and bidding of mechanical and electrical products nationwide designated by the State Department of Commerce and public service platform administrative supervision platform, registration please contact Chinese International Tendering requirements, refer to "mechanical and electrical products in the international bidding implementation measures" implementation.

5